8 12 serial connector amphenol part number: 84 2812 - xxxx - xxxx - 812 serial idc socket connector can be used where quick connect and disconnect capability are required, termination is fast and simple by means of idc te chnology, available in size from 10 to 64 contacts with or without mild - in center polarizing key, strain relief may be added to reduce strain on cable when removing connector. a. features & benefits : mil - c - 83503, bt224, iec603 - 13 and bs9525 - f0023 compa tible. .100? x .100? ( 2.54mm x 2.54mm ) grid. one step mass termination with no wire preparation. double depth slots for polarization ( except 10 & 14 contact sizes ). the mold - in cpk ( center polarizing key ) option is available. the accessories of optio nal cpk, polarizing plug and strain relief are available. selective gold plated contacts. various copper alloy options for contact material. ribbed cover for correct cable alignment. open - end cover for feed - through and daisy - chain application. cec ( close entry cover ) to shield the cable end exposure and to prevent any wrong direction entry. ul and csa approved. standard color grey only. various packaging options for ease of termination and handling. mate with 0.025? square pins male header and amphenol he ader of 816, 821 & 822 series b. specifications physical characteristics insulation material : glass reinforced polyester, ul flammability rating 94v - 0. contact material : beryllium copper or phoshphor bronze. contact area plating : gold over nickel. w ire accomodation : awg 26 and awg 28 stranded, or awg 28 and awg 30 solid. contact spacing : .100? ( 2.54mm ) grid terminates to .050? ( 1.27mm ) flat ribbon cable. electrical characteristics current rating : 1 amp. contact resistance : 50 m w max. diele ctric withstanding voltage : 500vdc min. at sea level.
812 serie s amphenol insulation resistance : 5,000 m w min. at 500vdc. mechanical characteristics durability : a. 500 cycles for 30 microi nches gold plated. b. 250 cycles for 15 microinches gold plated. c. 50 cycles for gold flash. mating force : 8 oz max. per contact. unmating force : 2 oz min. per contact. contact - body retention force : 8 oz min. per contact. environmental characterist ics humidity : 95% relative humidity at 40 c for 96 hours. operating temperature : - 55 c to +105 c c . applications oa equipment computer, peripheral testing equipment switching system industrial control d. ordering information
812 s eries amphenol table i no. of strain relief 842 - 800 - 1206 dim a dim b position grey black in .004 mm .10 in .004 mm .10 10 - 030 - 050 0.68 [17.27] 0.40 [10.16] 14 - 031 - 051 0.88 [22.35] 0 .60 [15.24] 16 - 032 - 052 0.98 [24.89] 0.70 [17.78] 20 - 033 - 053 1.18 [29.97] 0.90 [22.86] 26 - 034 - 054 1.48 [37.59] 1.20 [30.48] 30 - 040 - 060 1.68 [42.67] 1.40 [35.56] 34 - 035 - 055 1.88 [47.75] 1.60 [40.64] 36 - 041 - 061 1.98 [50.29] 1.70 [43.18] 40 - 036 - 056 2.18 [55.37] 1.90 [48.26] 50 - 037 - 057 2.68 [68.07] 2.40 [60.96] 60 - 038 - 058 3.18 [80.77] 2.90 [73.66] 64 - 039 - 059 3.38 [85.85] 3.10 [78.74] table ii - options code 02 - black, no cpk, open cover packed separately (obsoleted) 03 - gr ey, no cpk, close cover packed separately 04 - grey, mold - in cpk, close cover packed separately 05 - black, no cpk, close cover packed separately (obsoleted) 06 - black, mold - in cpk, close cover packed separately (obsoleted) 09 - black, no cpk, open cove r, pre - latch (obsoleted) 12 - grey, no cpk, open cover packed separately 13 - grey, mold - in cpk, open cover packed separately 22 - grey, no cpk, open cover, pre - latch 33 - grey, mold - in cpk, open cover, pre - latch 34 - grey, mold - in cpk, close entry cover on even side 35 - grey, mold - in cpk, close entry cover on odd side 43 - grey, no cpk, close entry cover on odd side 44 - grey, no cpk, close entry cover on even side 45 - black, mold - in cpk, open cover, pre - latch (obsoleted) optional black color socket is dis - continued. only standard grey is available.
812 serie s amphenol table iii - plating code 34 - 30 microinches ( 0.76 microns ) min. gold in m ating area, 100 to 200 microinches ( 2.54 to 5.08 microns ) 90/10 tin lead plated in termination area. and 50 microinches ( 1.27 microns ) min. nickel underplated allover. 18 - 15 microinches ( 0.38 microns ) min. gold in mating area, 100 to 200 microinche s ( 2.54 to 5.08 microns ) 90/10 tin lead plated in termination area. and 50 microinches ( 1.27 microns ) min. nickel underplated allover. aa - gold flash in mating area, 100 to 200 microinches ( 2.54 to 5.08 microns ) 90/10 tin lead plated in termination area. and 50 microinches ( 1.27 microns ) min. nickel underplated allover. title : part number : amphenol 812 series connector 8 12 series
|
